How to fit mudguards to my bike?

How do I fit full length mudguards to my front forks?

There are two mounting points on all of the forks on all of our bikes. They are at the crown and at the bottom of the fork leg near the axle.

All bolt holes take a 5mm bolt (the same as a bottle cage bolt)

Some mudguards will come with a bracket attached which is to be used on bikes with caliper brakes, if your bike has disc brakes this will need to be removed and a hole drilled in the mudguard for the bolt to pass through and attach to the forks.

How do I fit a full length mudguard to the rear of my bike?

At the rear of the bike there are 3 mounting points illustrated below.

If your bike is a SL or SLR you will require a few extra parts to install your mudguards.

You will require a mudguard bridge specific to your bike which can be found on our website HERE and a set of direct mount adaptors such as the SKS Mudguard - Straight Mount Adaptor.

The rear mudguard doesn’t require the bridge that comes fitted to the mudguard and will need removing and a hole drilling in its place as all mudguards are universal and not bike specific. 

If you are having issues fitting please visit a local bike shop who will be able to assist you.